DevKit8000 OMAP3530 Evaluation Kit
- TI OMAP3530 Processor based on 600MHz ARM Cortex-A8 core
- Memory supporting up to 256MByte DDR SDRAM and 256MByte NAND Flash
- UART, USB OTG, Ethernet, Audio, SD/MMC, Keyboard, Jtag,...
- Supports 24-bit TFT LCD, DVI-D and TV S-Video Output Display
- Supports VGA, Camera, WiFi, GPS, GPRS, 3G Functions through Modules
- Ready-to-Run Linux2.6 and WinCE 6.0

DevKit8000 Evaluation Board
The Texas Instruments’ OMAP3530 is a high-performance processor based on the enhanced OMAP™ 3 architecture. It includes many internal subsystems designed to support high-speed, multi-thread processing applications. The OMAP3530 includes an integrated advanced Superscalar ARM Cortex-A8 core, an IVA2.2 subsystem with a C64x+ digital signal processor (DSP) core, 2D/3D graphics accelerator, display subsystem, a camera ISP (Image Signal Processor), and high-performance system interconnects and industry-standard peripherals. The device includes state-of-the-art power-management techniques required for high-performance mobile products and supports high-level operating systems such as Windows CE, Linux, Symbian OS and Palm OS.
Embest DevKit8000 Evaluation Board is a compact board using OMAP3530 microprocessor. It takes full features of this processor and supports up to 256MByte DDR SDRAM and 256MByte NAND Flash as well as high-speed USB2.0 OTG function. The board has exposed many other hardware interfaces including RS232 serial port, LCD/TSP, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C and JTAG. The board has two methods to boot the system from either SD card or NAND flash. It is able to support WinCE and Linux OS and provided with WinCE6.0 BSP and Linux2.6.28 BSP. Embest also provides demos of Google Android OS, Angstrom (GPE) and DVSDK for user experience.
Embest DevKit8000 Evaluation Kit includes the DevKit8000 evaluation board and all necessary accessories to help users start their design of multimedia applications. The board is preloaded with Linux OS in NAND flash and WinCE OS in SD card. User can display the subsystem using a 4.3" TFT LCD and Touch screen or using a DVI-D monitor through an HDMI to DVI-D calbe, or using TV for NTSC/PAL video out. The USB OTG interface can also be used as USB Host function with a Mini-A to Standard-A cable, or used as USB Device function with a Mini-B to Standard-A cable. The board has audio and video codecs, with the help of DSP, H.264, MPEG4, CIF, and D1 media formats all can be supported. Along with the kit, Embest provides user manual, schematic drawing and datasheet documents to help customers better understand and use the kit.
Additionally, Embest offers various modules for Devkit8000 including VGA (VGA8000), WiFi (WF8000-U), Analog Camera (CAM8000-A), GPS (GPS8000-S), GPRS (GPRS8000-S), 3G (CDMA8000-U) and Digital Camera (CAM8000-U) modules which greatly extends the functions of the board and would be flexible for customer selection to meet their own needs.

Hardware Features
- Dimensions: 110mm x 95mm
- Working temperature: 0°C to 70°C
- Processor: TI OMAP3530 microprocessor with 600MHz ARM Cortex-A8 RISC Core
- Power supply: +5V
- 128MB DDR SDRAM, 166MHz (256MB for option)
- 128MB NAND Flash, 16bit (256MB for option)
- LCD/Touch Screen interface (50-pin FPC connector, support resolution up to 2048*2048)
- DVI high-resolution image output port (HDMI interface, support 720p, 30fps signal)
- S-Video display interface
- One audio input interface (3.5mm audio jack)
- One 2-channel audio output interface (3.5mm audio jack)
- One 10/100M Ethernet interface (RJ45)
- One High-speed USB2.0 OTG port (Mini USB type interface)
- One High-speed USB2.0 Host port (USB A type interface)
- Two serial ports (one 3-wire RS232 serial port led out from 2.54mm 10-pin connector and one 5-wire TTL serial port led out from expansion connector)
- SD/MMC interface (supports 3.3V and 1.8V logic voltage)
- One camera interface (30-pin FPC connector, support CCD or CMOS camera)
- 6*6 keyboard interface
- One 14-pin Jtag interface
- Four buttons (Reset, Boot, User defined, On/Off)
- One expansion connector (2.0mm 40-pin SMT Female Pin Header, McSPI, McBSP, I2C, HDQ, GPIO are led out from this connector)
Add-on Hardware Options
| Item |
Description |
Interface to Devkit8000 |
Linux |
WinCE |
| VGA8000 |
VGA Module |
LCD |
Support |
Support |
| CAM8000-A |
Analog Camera Module |
Camera |
Support |
Not Support |
| WF8000-U |
WiFi Module |
USB Host |
Support |
Support |
| GPS8000-S |
GPS Module |
UART |
Support |
Support |
| GPRS8000-S |
GPRS Module |
UART |
Support |
Support |
| CDMA8000-U |
3G Module
(CDMA2000 standard) |
USB Host |
Support |
Support |
| CAM8000-U |
Digital Camera Module |
USB Host |
Support |
Support |
| XDS100v2 |
Emulator for debugging |
JTAG |
|
| TDS560 |
Emulator for debugging |
JTAG |
Software Features
| OS |
Item |
Feature |
Description |
| Linux |
Boot |
Version |
X-loader-1.41 U-boot 1.3.3 |
| Boot Mode |
Boot Linux from SD card, NAND Flash or Ethernet |
| Image update |
Support updating image from SD card or Ethernet |
| Kernel and drivers |
Version |
Linux 2.6.28 |
| File system Format |
ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS |
| Driver |
Serial, RTC, NET, Nand, LCD, Touch Screen, MMD/SD, USB OTG, DVI, Keypad, LED, Audio |
| File System |
File System Format |
Ramdisk File System, UBI File System |
| Function |
Provided Lib (ALSA -lib, tslib, glibc), udev support |
| Demo |
Angstrom |
Audio (XMMS), network (firefox), graphics editor (gimp) and document processing software (Abiword) |
| Android |
Google developed a platform based on Linux open-source mobile phone operating system. |
| DVSDK |
Support MPEG4, MPEG2, H264, mp3, aac audio/video formats and Codecs |
| WinCE |
Boot |
Version |
x-load-1.41, eboot |
| Boot Mode |
Boot WinCE from SD card, NAND Flash or Ethernet |
| Image update |
Support updating image from SD card or Ethernet |
| System |
Characteristic |
KITL kernel debug, Reboot, Watchdog, RTC |
| Driver |
display driver(DVI, TFT LCD) |
| SD card, Keyboard, McSPI, McBSP, Audio, NET, NLED, USB OTG, WiFi, GPS, GPRS, CDMA |
| Function |
Power Management (backlight drive, battery-driven, sleep/wake-up function) |
| Hive registry support |
| ROM file system support |
| Software features |
Mediaplayer 9.0, Word and Internet Explorer 6.0 |
| .NET Compact Framework 3.5 |
Onboard Interfaces and Connectors

Relative Documentation and Links
DevKit8000 Evaluation Kit Overview
TI OMAP3530 datasheet
Dimension drawing of Devkit8000 board
Devkit8000 FAQ
XDS100v2 USB JTAG Emulator
TDS560 USB-Plus JTAG Emulator
Customer Design ServiceEmbest also offers customer design service based on the Devkit8000 board according to customer’s requirement. Whether you need to reduce, add or modify to existing hardware, Embest will help customers with expert competence and rich experience.
|